LEARN ABOUT 3D PRINTING MATERIALS

Why are there different materials?

Different kinds of technologies print different kinds of materials, ranging from plastics to acrylics. When deciding what material to print your prototype in, it is important to keep in mind what properties each material has. You should consider using different materials depending on the intended function of your prototype, keeping in mind limitations like a technology’s maximum dimensions. Below is a chart of the different types of materials as well as the most common applications and limitations of each.

 

General Information

Technology

MultiJet Printing (MJP)

Used For

  • Prototypes with complex geometries that require a higher resolution
  • Similar to SLA
  • Better impact absorption and smoother surface

Material Options

High Detail Plastic (EX200)

Learn about MJP

Technology

Color Jet Printing (CJP)

Used For

  • Models that require full color printing
  • Rigid and shock absorbent

Material Options

Full-Color Plastic (C4 Spectrum)

Learn about CJP

Technology

Fused Deposition Modeling (FDM)

Used For

  • Raw prototypes that with low resolution
  • Tough, impact absorbent, chemical resistant

Material Options

  • Low Detail Oil-Based Plastic (ABS)
  • Low Detail Bio-Based Plastic (PLA)

Learn about MJP

 

 

Technical Specs

Technology

MultiJet Printing (MJP)

Layer Thickness

Horizontal build layers down to 16 microns (0.0006 inches)

Recommended Minimum Feature Size

0.024”

Maximum Dimensions

11.75 x 7.3 x 8 inches (298.45 x 185.42 x 203.2 millimeters)

Learn about MJP

Technology

Color Jet Printing (CJP)

Layer Thickness

0.0035″–0.004″

Recommended Minimum Feature Size

0.040”

Maximum Dimensions

10 x 15 x 8 inches (254 x 381 x 203.2 millimeters)

Learn about MJP

Technology

Fused Deposition Modeling (FDM)

Layer Thickness

0.0050”

Recommended Minimum Feature Size

0.05”

Maximum Dimensions

9 x 10.75 x 9.5 inches or 230 x 265 x 240 millimeters

Learn about MJP

 
 

Prototypes Created By Using Hi-Tech Materials | 3d printing materials | 3d printer materials | 3d printed materials | 3d print materials | 3-d printing materials | materials for 3d printing

Leave a Reply

Your email address will not be published. Required fields are marked *